Compresseur à vis APS 10 Combi Dry X 10 bar 10 ch/7,5 kW 920 l/min 500 L
- Délai de livraison : 2 à 5 jours ouvrés
- Livraison gratuite à partir de 150 € HT !
- Livraison partout en France
- Commandez-vous en Belgique ? Allez sur fr.Airpress.be !
- 98 % de nos clients sont satisfaits de leur choix.
Détails du produit
| Référence | 369010 |
|---|---|
| EAN | 8712418361773 |
| Longueur (mm) | 1670 |
| Largeur (mm) | 700 |
| Hauteur (mm) | 1660 |
| Poids (kg) | 380,00 |
| Charge de travail (% travail / repos) | 100/0 |
| Puissance moteur (ch/kW) | 10.0 ch / 7.5 kW |
| Classe de rendement du moteur | IE3 |
| Type de moteur | AC |
| Entrainement | Entraînement direct 1:1 |
| Panneau de contrôle | MAM-860 |
| Sécheur | Oui |
| Tension de sécheur (V) | 230 |
| Réservoir d'air | Oui |
| Capacité de la cuve (l) | 500 |
| Cuve galvanisée | Non |
|---|---|
| Pression maximale (Bar) | 10 |
| Pression d’enclenchement (bar) | 6 |
| Débit d'air restitué (l/min) | 920 |
| Débit d'air restitué (m3/h) | 55.2 |
| Niveau sonore dB(A) (0 m) | 63 |
| Niveau sonore dB(A) (4 m) | 43 |
| Types fiche de prise | EU |
| Raccord d'air principal (") | 3/4 |
| Température ambiante minimale (°C) | 10 |
| Température ambiante maximale (°C) | 45 |
| Sans huile | Non |
| Étage | 1 |
| Démarreur | Y-∆ |
| Alimentation (V) | 400 V / 50 Hz / 3 Ph |
| Vitesse variable (IVR) | Non |
Produit recommandé
Description
The Airpress APS 7.5 Combidry X is a direct driven screw compressor with a fixed speed. Due to the compact design, this machine does not take up much space, but it does have a 200 liter compressed air boiler and a cooling dryer. The direct drive ensures a 1 on 1 transfer from the electric motor to the screw block, so that no losses occur. A large screw block ensures a high airflow at a low speed. The most important parameters can be read and adjusted on the display of the controller. A large oil cooler with fan, which temperature is switched, provides excellent cooling. The machine has been carefully designed so that fewer parts are maintenance-sensitive and the machine is therefore very durable. The service interval of 3,000 hours also ensures lower maintenance costs.
X series Screw compressors
By continuously investing in the development of our products, the Airpress Group presents a new series of screw compressors. The screw compressors are available from 5.5 kW to 37 kW. The APS X series is available in two versions: controlled at a fixed speed or speed. Machines of 15 kW are also available with a two-stage screw block. These versions have an increased performance with the same power consumption as a single-stage version. Depending on demand, these machines are available as a separate unit, mounted on a tank or mounted on a tank and equipped with a compressed air dryer. Compressors of the X series are characterized by a new generation of screw blocks. The direct drive avoids losses due to the transmission. Reliable and efficient, easy-to-use screw compressors ensure trouble-free operation at minimal costs. Equipped with a modern control panel, you can constantly monitor the screw compressor and change parameters if necessary.
Documents
Alternatives
