Compresseur à vis APS-X 10 Combi Dry 10 bar 10 ch/7.5 kW 920 l/min 500 L

6 250,00 € 7 562,50 €
En stock


Fiche produit
  • ce


Référence 369010
EAN 08712418361773
Poids 380,00
Longueur, largeur, hauteur (cm) 167 x 70 x 166
Charge de travail (% travail / repos) 100/0
Puissance moteur (ch/kW) 10.0 ch / 7.5 kW
Type de moteur AC
Entrainement Entraînement direct 1:1
Sécheur 230 V / 50 Hz / 1 Ph
Réservoir d'air Oui
Capacité de la cuve (l) 500
Débit d'air restitué (l/min) 920
Pression maximale (bar) 10
Débit maximum d'air restitué (l/m) 920
Débit maximum d'air restitué (m3/h) 55.2
Débit d'air restitué (m3/h) 55.2
Niveau sonore dB(A) (0 m) 63
Niveau sonore dB(A) (4 m) 43
Types fiche de prise EU
Liquide de refroidissement Air
Taille raccord 3/4"
Sans huile Non
Étage 1
Démarreur Y-∆
Alimentation 400 V / 50 Hz / 3 Ph
Refroidisseur de sortie Non
Vitesse variable (IVR) Non

Description du compresseur à vis APS-X 10 Combi Dry 10 bar 10 ch/7.5 kW 920 l/min 500 L

The Airpress APS 7.5 Combidry X is a direct driven screw compressor with a fixed speed. Due to the compact design, this machine does not take up much space, but it does have a 200 liter compressed air boiler and a cooling dryer. The direct drive ensures a 1 on 1 transfer from the electric motor to the screw block, so that no losses occur. A large screw block ensures a high airflow at a low speed. The most important parameters can be read and adjusted on the display of the controller. A large oil cooler with fan, which temperature is switched, provides excellent cooling. The machine has been carefully designed so that fewer parts are maintenance-sensitive and the machine is therefore very durable. The service interval of 3,000 hours also ensures lower maintenance costs.

X series Screw compressors

By continuously investing in the development of our products, the Airpress Group presents a new series of screw compressors. The screw compressors are available from 5.5 kW to 37 kW. The APS X series is available in two versions: controlled at a fixed speed or speed. Machines of 15 kW are also available with a two-stage screw block. These versions have an increased performance with the same power consumption as a single-stage version. Depending on demand, these machines are available as a separate unit, mounted on a tank or mounted on a tank and equipped with a compressed air dryer. Compressors of the X series are characterized by a new generation of screw blocks. The direct drive avoids losses due to the transmission. Reliable and efficient, easy-to-use screw compressors ensure trouble-free operation at minimal costs. Equipped with a modern control panel, you can constantly monitor the screw compressor and change parameters if necessary.


Rédigez votre propre commentaire
Vous commentez :Compresseur à vis APS-X 10 Combi Dry 10 bar 10 ch/7.5 kW 920 l/min 500 L
Votre notation